Second Sock Syndrome (SSS)

Hooray! I've completed one sock of the KOIGU pair my hubby requested! Now I just need the motivation to complete the second one! Why am I not ready to jump in and complete the pair? Because 1) there's always the temptation to start one of the new projects that you found while you were knitting sock #1 and 2) in my case, completing sock #1 did have some knitting drama associated with it... (hence this post). Enter... second sock syndrome (SSS).

So I'd just completed about 4 inches of the foot portion when I "requested a fitting" from the future owner (my husband). He donned the sock, and I measured that I needed to knit another 2" before starting the decreases for the toe. So I knit, knit, knit and requested a second fitting. Jason tells me "you know, it doesn't really seem any longer". So, I continue to knit, knit, knit, WITHOUT confirming that the sock was positioned in the same place on his foot during fitting #2 as fitting #1. So I complete the toe decreases and after a brief kitchener stitch youtube refresh (compliments of the KnitWitch), I graft the sock and am done. Excitedly, I show the sock to Jason, who tries it on, and behold - the foot was easily THREE INCHES TOO LONG!

His foot looked like a Dr. Seuss character!!! I was crushed! I think he must have pulled the sock up higher on his foot, in fitting #2, which I definitely should have noticed. I thought of knitting an identical misfit sock, and then shrinking them in a hot laundry cycle.... but I realized this KOIGU is 100% wool, and they'd felt. So.... at midnight last night, I un-sewed the toe and proceeded to rip out 3" of sock! Amazingly, I was able to pick up all the stitches and resume at a safe point. Looking back, I should have taken a picture of his Dr. Seuss sock because it looked really funny, but I think I was too crushed at the time. Here is a photo of the properly sized sock #1, which I completed an hour ago. The final product did come out great. BTW, that's my husband's leg, not mine. :)

So I'm kinda pooped on the socks. Hence the SSS.

Most knitters remedy this condition by knitting 2 socks at once, using 2 circular needles - and also because I think using double pointed needles (DPNs) has a bad rap. But I actually love DPNs - they're more compact and I think you can knit faster with them, rather than sliding stitches along a cable, if you don't have a perfect length circular needle. But... to each their own.

Single sock.... I promise to knit you a mate.... but enjoy a solitary lifestyle for a bit - it might be a while until you meet your match.

Handling a Hank

You may be thinking that this post is about how to evade an irritating person named Hank, but no, it's a knitting post! Earlier this week at my local knitting store, I was permitted to use the wooden swift, unattended, to ball up my hanks of KOIGU and I'm actually pretty proud of that. (Sadly it doesn't take much, ladies and gentleman....).

So. Many yarns are sold in tractable bundles such as "center-pull balls" or "skeins" that allow you to cast on immediately and start your project. But a lot of yarn is sold in a bundle called a "hank", which is basically a big loop of yarn that's twisted up like a figure eight and needs to be re-wound into a ball or a spool before starting your project. Why would yarn not already come balled up? The answer is pretty odd, according to my research - a lot of yarn is large-scale manufactured in 3rd world countries, where cheap manufacturing costs are key. Apparently purchasing and maintaining a machine that is designed to wind center pull balls is an expense many factories can not (or choose not to) fund. I've also heard that yarn can be packaged better when it's in a hank, as well. So the expense of balling yarn goes to the purchaser. Note that although balling up my yarn by hand wasn't the worst thing in the world, it does take time and I'm sure it wouldn't be fun if I was chained to a radiator, doing it for 20 hours a day.

OK, so how does the yarn get into neat little balls? Do customers wind them up at home? You can - and I've done it a couple times - and it starts to be a serious pain after about 5 minutes. Also in this scenario, the balls pull from the outside, which means they roll all over the place as you knit. This isn't a major inconvenience, but when it rolls far away, it causes extra tension in the yarn when you knit. And not to mention that if it rolls under the couch, it gets all sorts of dust bunnies on it. At least with my sofa. A yarn swift is used to create center-pull balls that will sit nicely in one spot as you knit. You basically loop the yarn hank around the "umbrella" portion of the swift, and expand it so the loop stays taught (but not too taught). Next you cut or untie (I never like to suggest cutting anything in knitting) the yarn holding the hank together and feed one of the loose ends through the metal eye and onto the winder. As you turn the winder handle, the umbrella will rotate and feed the winder. And 2 minutes later: Voila! A nice center-pull ball of yarn is ready! Generally the yarn store has a swift that they'll use to ball your material, as a courtesy for your purchase. Using a swift does require a little bit of hand coordination, which is why I am excited that the employees at the store let me finally use it on my own. If you don't know what you're doing, the yarn can slip off, or get caught in a nasty knot - and no employee wants to deal with customers doing this.

Could you skip balling up your yarn and knit right from the hank? I suppose, but I've read comments from many knitters who've done this and almost all report ultimately cutting their losses (from vicious knots that formed) and purchasing a whole new skein of yarn. You can see the center-pull yarn ball here, that I'm making socks from. These socks are for my wonderful husband, who requested them oh about a year ago, and has been patiently waiting. The socks are KOIGU KPPPM, knit on size 3 DPNs.

So that's a little blurb on using a swift. Hey, before I go, Happy Birthday to my mom, my father-in-law, and my cousin's wife, who all have birthdays this week! Cheers!

2008 Milestones

This past year I completed 2 knitting projects that I think are noteworthy. My first pair of socks, and my first sweater. I think these are some milestones for a relatively new knitter, which I am!

The socks seen here are made with KOIGU KPPPM yarn, purchased from Purl Soho. They came out great! I'd made 2 previous attempts at making socks (one of which earned the title "the sock-boot", which needless to say did not turn out well). In my prior trials, I didn't know anything about gauge, so they resembled Christmas stockings, rather than actual socks. But these came out really well (better than I expected, actually). I used the Yankee Knitter Classic sock pattern and #2 DP needles.

Hooray! And my beloved first sweater! It's a top-down knit, which worked great since I could try it on for sizing as I went along. The pattern is called "Juliet" and I used double strands of Tahki Yarn Cotton Classic. I learned a lot doing the eyelet - like using markers and looking for repeating parts of the pattern to make sure everything is lining up properly. I was very happy with the final product.